Reworked =sys-boot/raspberrypi-firmware-9999 to remove file colisions.

4 files changed, 84 insertions, 4 deletions

diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
new file mode 100644
index 0000000..39112a2
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
@@ -0,0 +1 @@
+ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
new file mode 100644
index 0000000..9401530
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
@@ -0,0 +1,81 @@
+#from archlinux arm sdcard image
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# for more options see http://elinux.org/RPi_config.txt
+
+## Some over clocking settings, govenor already set to ondemand
+
+##None
+#arm_freq=700
+#core_freq=250
+#sdram_freq=400
+#over_voltage=0
+
+##Modest
+#arm_freq=800
+#core_freq=300
+#sdram_freq=400
+#over_voltage=0
+
+##Medium
+#arm_freq=900
+#core_freq=333
+#sdram_freq=450
+#over_voltage=2
+
+##High
+#arm_freq=950
+#core_freq=450
+#sdram_freq=450
+#over_voltage=6
+
+##Turbo
+#arm_freq=1000
+#core_freq=500
+#sdram_freq=500
+#over_voltage=6
+
+gpu_mem_512=316
+gpu_mem_256=128
+cma_lwm=16
+cma_hwm=32
+cma_offline_start=16
+
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd
new file mode 100644
index 0000000..22ed093
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd
@@ -0,0 +1,2 @@
+CONFIG_PROTECT="/boot/config.txt /boot/cmdline.txt"
+
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware.envd b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware.envd
deleted file mode 100644
index 303814e..0000000
--- a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware.envd
+++ /dev/null
@@ -1,4 +0,0 @@
-PATH="/opt/vc/bin/:/opt/vc/sbin"
-ROOTPATH="/opt/vc/bin/:/opt/vc/sbin"
-LDPATH="/opt/vc/lib/"
-OPENGL_PROFILE="raspberrypi"
\ No newline at end of file